banner
Home / Blog / KraussMaffei and partners to bring injection moulded bike to Fakuma 2023
Blog

KraussMaffei and partners to bring injection moulded bike to Fakuma 2023

Jul 31, 2023Jul 31, 2023

The frame and fork are made of a high-performance polymer with recycled carbon fibers. They are produced by specialist Weber Fibertech on an MX 1600 from KraussMaffei. The prototype of the new Lion Bikes can be seen live at the KraussMaffei booth at Fakuma (Friedrichshafen, October 17 – 21, Hall A7, Booth 7303).

The new Lion bikes stand for more visibility and thus safety for children in road traffic. They have a special paint that makes the frame glow. The unusually large lighting system with daytime running lights that is completely integrated into the frame enhances the visibility of the bikes. The frame and fork are made of the high-performance polymer polyamide 6 with 40 percent recycled carbon fibers – a ‘groundbreaking’ new and resource-saving material mix in the bicycle industry.

KraussMaffei says that thanks to these durable and 100% recyclable materials, the main components can be produced using a state-of-the-art injection molding process. Benefits for kids: a clean look with no welded seams at all, a stylish design and, most importantly, a mini-CO2 footprint.

The frame and fork are being manufactured by specialist Weber Fibertech, on an MX 1600 from KraussMaffei, which is to be delivered this November. The first finished Lion Bikes will then be available on the market from spring 2024, in time for Easter. To ensure that all this can be done in terms of quality and on-time delivery, Weber Fibertech is relying on the many years of experience and expertise of KraussMaffei. Friedbert Schmitt, CEO of Weber Fibertech said: "The technical performance of the MX series has won us over, and there's no turning back. In particular, we were impressed by how, with a screw diameter of 120 mm, injection was carried out at 300 mm/s, thus achieving a large volume with rapid mold filling."

To ensure that the frame and fork are stable and at the same time require less material, Weber Fibertech uses the KraussMaffei MX 1600 in combination with the WIT process. The company claims that water injection molding is ideal for producing such functionally complex, highly integrated plastic components with hollow body construction. The appropriate machine and technology come from PME fluidtec, specialist with more than 100 successful WIT processes on the market.

The special feature here is that PME is using the mass back-pressure method in the WIT process for bicycle frames for the first time. The melt displaced by the water is pressed back into the plasticising unit and reused in the next shot for the frame or fork. This means that there is no waste during production, which in turn saves material during production and is beneficial for the carbon footprint.

Going one step further and comparing the production of Lion Bikes with conventional aluminum frames and forks, the company claims that CO2 emissions are 67 percent lower for each bike produced. Since the components are now made in Germany, this also shortens the supply chains and transport routes. Another important contribution to sustainability efforts.

Lion Bike live at the KraussMaffei booth at Fakuma

Visitors can experience live at the KraussMaffei booth at Fakuma how more safety, cool design and sustainable production are revolutionizing the bicycle industry (Friedrichshafen, October 17 - 21, Hall A7, Booth 7303). Together with partner Weber Fibertech and PME, KraussMaffei is showing the prototype of the new Lion Bikes. Friedbert Schmitt added: "With the processing of high-performance polymers and recycled carbon fibers and the production made in Germany, we are sending an important signal in the direction of sustainability in the bicycle industry."